User:DukeAnt/调音台

位于纽约某录音棚的SSL SL9000J型72通道调音台

调音台（也叫混音器、混音台等），是一种在专业音频领域中使用的用来对音频信号进行混合（即混音），路由，调节音量、音色、动态范围等的电子设备。依型号不同，调音台可用于模拟信号、数字信号。最后调整好的信号（电平或数字采样）合到一起成为合成的输出信号。

调音台应用到了很多地方，比如录音棚、公共广播系统、扩声系统、广播、电视以及电影后期制作等等。例如这样简单的应用场景：来自两个话筒的声音（比如二重唱），需要从同一套扬声系统中同时听到。在用于现场演出的时候，除非特定的调音台自带功率放大功能或者连接到有源音箱，否则调音台所处理产生的信号一般是直接送到功率放大器的。在各种现场表演的盗录中，质量最高的必然源自调音台对扬声系统的输出信号，即所谓调音台内录。

界面

雅马哈2403调音台

Mackie ONYX 80调音台上的输入通道条部分、编组部分、Master部分

典型的模拟调音台面板由三部分组成：

• 输入通道
• Master控制器（主控制器）
• 音量表

输入通道条通常是一组相同的单声道或立体声输入通道。Master控制部分有编组推子、Master推子、主混音总线控制和辅助返回音量控制。此外还有SOLO监听控制（独奏监听控制）、对讲麦克风控制、哑音控制和输出矩阵混音器。小一些的调音台，输入在调音台面板的左边，Master控制器在面板的右边。大一些的调音台，Master控制器在面板的中央，而输入在面板的两侧。音量表一般在输入和主控部分的上方，或者整合在了输入和主控部分中。

输入通道条

输入通道条一般由以下部分组成：

• 输入插孔(Jack)
• 前级放大器
• 等化器
• 动态处理区（例如动态范围压缩、噪音门）
• 路由区，包括直接输出、辅助送出、PAN（声像控制器）和编组分配按钮
• 输入推子

为了便于区分和操作，一般这些区域会被标以不同的颜色。每个输入都有自己的“通道”——视调音台型号不同，或是立体声通道，或是单声道通道。多数调音台的通道都有一个XLR母头，有些还有RCA母头或TRS母头（作为线路输入接口）。

Basic input controls

Below each input, there are usually several rotary controls (knobs, pots). The first is typically a trim or gain control. The inputs buffer the signal from the external device and this controls the amount of amplification or attenuation needed to bring the signal to a nominal level for processing. This stage is where most noise of interference is picked up, due to the high gains involved (around +50 dB, for a microphone). Balanced inputs and connectors, such as XLR or phone connectors, reduce interference problems.

There may be insert points after the buffer/gain stage, which send to and return from external processors which should only affect the signal of that particular channel. Effects that operate on multiple channels are connected to the auxiliary sends (below).

Auxiliary send routing

The auxiliary send routes a split of the incoming signal to an auxiliary bus which can then be used with external devices. Auxiliary sends can either be pre-fader or post-fader, in that the level of a pre-fade send is set by the auxiliary send control, whereas post-fade sends depend on the position of the channel fader as well. Auxiliary sends can be used to send the signal to an external processor such as a reverb, which can then be routed back through another channel or designated auxiliary returns on the mixer. These will normally be post-fader. Pre-fade auxiliary sends can be used to provide a monitor mix to musicians onstage; this mix is thus independent of the main mix.

Channel equalization

Further channel controls affect the equalization of the signal by separately attenuating or boosting a range of frequencies, e.g., bass, midrange, and treble. Many mixing consoles have a parametric equalizer on each channel. Some mixers have a general equalization control (either graphic or parametric) at the output.

Cue System

The cue system allows the operator to listen to one or more selected signals without affecting the console's audio outputs. The signal from the cue system is fed to the console's headphone amp and may also be available as a line-level output that is intended to drive a monitor speaker system. The terms PFL (Pre Fade Listen) and AFL (After Fade Listen) are used to characterize the point in the signal flow from which the cue signal is derived. Input channels are usually configured as PFL so the operator can audition the channel without sending it to any mix. Consoles with a cue feature will have a dedicated button that is typically labeled "Cue" (although AFL, PFL, Solo and Listen are also used) on each channel.

Solo In Place (SIP) is a related feature found on more advanced consoles. It typically is controlled by the Cue button but unlike Cue, SIP is destructive of the output mix. Its purpose is to mute everything except the channel or channels that are being soloed. SIP is useful for setup and trouble-shooting in that it allows the operator to quickly mute everything but the signal being worked on. For obvious reasons, SIP is a function that would be dangerous to a mix engineer's career if engaged during performance. For this reason most consoles require very deliberate actions by the operator to engage SIP mode.

Subgroup and mix routing

Each channel on a mixer has a sliding volume control (fader) that allows adjustment of the level of that channel. The signals are summed to create the main mix, or combined on a bus as a submix, a group of channels that are then added to get the final mix (for instance, many drum mics could be grouped into a bus, and then the proportion of drums in the final mix can be controlled with one bus fader).

There may also be insert points for a certain bus, or even the entire mix.

VCA groups

Found on higher-end consoles, voltage-controlled amplifier (VCA) groups function somewhat like subgroups but differ in important ways. VCA groups allow the level of multiple input channels to be controlled by a single fader. Unlike subgroups, no sub-mix is created. The audio signals from the assigned channels continue to be routed independently of VCA assignments. Since no sub-mix is created, it is not possible to insert processing such as compressors into a VCA/DCA group. In addition, on most VCA/DCA-equipped consoles any post-fader auxiliary send levels will be affected by the VCA master. Usually this is desirable as post-fader auxiliary sends are commonly used for effects such as reverb and sends to these effects should track changes in the channel signal level.

主输出控制器

编组和主输出推子一般出现在在调音台面板的右侧。大一些的调音台，主输出推子在面板的中央，而输入在面板的两侧。路由矩阵、耳机和监听控制器通常也在这一区域。对讲控制器控制控制表演者的监听、耳机或耳塞。测试音发生器和辅助返回通常也在这一区域。

音量表

API公司Legacy Plus调音台的表桥

⇑ VU表

---

⇐ 音量峰值表

调音台上通常有一个或多个VU表、峰值表用来监控每个通道及主输出的音量，并防止信号被削峰。多数调音台除了主混音外还至少有一个其他的输出——或是独立的总线输出，或是“辅助输出”，例如用来输出和舞台监听不同的混音。

人对声音的感知，更接近与强度、频率的对数成正比而不是强度值、频率值本身，因而调音台总是以分贝为单位控制和显示这些参数。由于分贝是一种比值，音量表必须要有基准电平。所谓的“专业调音台”，基准电平一般为 +4 dBu，而所谓的“民用级调音台”，基准电平一般为 -10 dBv。

Hardware routing and patching

For convenience, some mixing consoles include inserts or a patch bay or patch panel. Patch bays are mainly used for recording mixers.

Other features

Most, but not all, audio mixers can

• add external effects.
• use monaural signals to produce stereo sound through pan and balance controls.
• provide phantom power required by some microphones.

Some mixers can

• create an audible tone via an oscillator.
• add effects internally.
• read and write console automation.
• be interfaced with computers or other recording equipment (to control the mixer with computer presets, for instance).
• control or be controlled by a digital audio workstation via MIDI or proprietary commands.
• be powered by batteries.

Digital versus analog

Digidesign's Venue Profile mixer on location at a corporate event. This digital mixer allows plugins from third-party vendors

参见：Comparison of analog and digital recording

Digital mixing console sales have increased dramatically since their introduction in the 1990s. Yamaha sold more than 1000 PM5D mixers by July, 2005, and other manufacturers are seeing increasing sales of their digital products. Digital mixers are more versatile than analog ones and offer many new features, such as reconfigure signal routing at the touch of a button. In addition, digital consoles often include processing capabilities such as compression, gating, reverb, automatic feedback suppression and delay. Some products are expandable via third-party software features (called plugins) that add further reverb, compression, delay and tone-shaping tools. Several digital mixers include spectrograph and real time analyzer functions. A few incorporate loudspeaker management tools such as crossover filtering and limiting. Digital signal processing can perform automatic mixing for some simple applications, such as courtrooms, conferences and panel discussions. Consoles with motorized faders can read and write console automation.

Propagation delay

Digital mixers have an unavoidable amount of latency or propagation delay, ranging from 1.5 ms to as much as 10 ms, depending on the model of digital mixer and what functions are engaged. This small amount of delay is not a problem for loudspeakers aimed at the audience or even monitor wedges aimed at the artist, but can be disorienting and unpleasant for IEMs (In-ear monitors) where the artist hears their voice acoustically in their head and electronically amplified in their ears but delayed by a couple of milliseconds.

Every analog to digital conversion and digital to analog conversion within a digital mixer entails propagation delay. Audio inserts to favorite external analog processors make for almost double the usual delay. Further delay can be traced to format conversions such as from ADAT to AES3 and from normal digital signal processing steps.

Within a digital mixer there can be differing amounts of latency, depending on the routing and on how much DSP is in use. Assigning a signal to two parallel paths with significantly different processing on each path can result in extreme comb filtering when recombined. Some digital mixers incorporate internal methods of latency correction so that such problems are avoided.

Ease of use

16-channel mixing console with compact short-throw faders

Analog consoles remain popular due to their continuing to have one knob, fader or button per function, a reassuring feature for the user. This takes up more physical space but allows more rapid response to changing performance conditions. Most digital mixers take advantage of the technology to reduce the physical space requirements of their product, entailing compromises in user interface such as a single shared channel adjustment area that is selectable for only one channel at a time. Additionally, most digital mixers have virtual pages or layers which change the fader banks into separate controls for additional inputs or for adjusting equalization or aux send levels. This layering can be confusing for operators.

Analog consoles make for simpler understanding of hardware routing. Many digital mixers allow internal reassignment of inputs so that convenient groupings of inputs appear near each other at the fader bank, a feature that can be disorienting for persons having to make a hardware patch change.

On the other hand, many digital mixers allow for extremely easy building of a mix from saved data. USB flash drives and other storage methods are employed to bring past performance data to a new venue in highly portable manner. At the new venue, the traveling mix technician simply plugs the collected data into the venue's digital mixer and quickly makes small adjustments to the local input and output patch layout, allowing for full show readiness in very short order.

Some digital mixers allow offline editing of the mix, a feature that lets the traveling technician use a laptop to make anticipated changes to the show while en route, further shortening the time it takes for the sound system to be ready for the artist.

Sound quality

Both digital and analog mixers rely on analog microphone preamplifiers, a high-gain circuit that increases the low signal level from a microphone to a level that is better matched to the console's internal operating level. In this respect, both formats are on par with each other. In a digital mixer, the microphone preamplifier is followed by an ADC which quantizes the audio stream. Ideally, this process is carefully engineered to deal gracefully with overloading and clipping while delivering an accurate digital stream over the linear dynamic range. Further processing and mixing of digital streams within a mixer need to avoid clipping and truncation if maximum audio quality is desired.

Analog mixers, too, must deal gracefully with overloading and clipping at the microphone preamplifier and as well as avoiding overloading of mix buses. Background hiss in an analog mixer is always present, though good gain stage management minimizes its audibility. Idle subgroups left "up" in a mix will add their background hiss to the main outputs; many digital mixers avoid this problem by low-level gating. Digital circuitry is more resistant to outside interference from radio transmitters such as walkie-talkies and cell phones.

Many electronic design elements combine to affect perceived sound quality, making the global "analog mixer vs. digital mixer" question difficult to answer. Controlled ABX double-blind listening tests have not been published at this date; no conclusive answer can be reached. Experienced live sound professionals agree that microphones and loudspeakers (with their innate higher distortion levels) are a much greater source of coloration of sound than the choice of mixer. The mix style of the person mixing is also more important than the make and model of audio console. Analog and digital mixers both have been associated with extremely high-quality concert performances and studio recordings.

Remote control

Analog mixing in live sound has had the option since the 1990s of using wired remote controls for certain digital processes such as monitor wedge equalization and parameter changes in outboard reverb devices. That concept has expanded until wired and wireless remote controls are being seen in relation to entire digital mixing platforms. It's possible to set up a sound system and mix via wireless (or wired) laptop, touchscreen or tablet, especially if the performance requires no unpredictable fast responses to multiple changing conditions on stage. Computer networks can connect digital system elements for expanded monitoring and control, allowing the system technician to make adjustments to distant devices during the performance. The use of remote control technology can be utilized to reduce "seat-kills", allowing more paying customers into the performance space.

Software mixers

For recorded sound, the mixing process can be performed on screen, using computer software and associated input, output and recording hardware. The traditional large control surface of the mixing console is not utilized, saving space at the engineer's mix position. In a software studio, there is either no physical mixer fader bank at all or there is a compact group of motorized faders designed to fit into a small space and connected to the computer via USB or Firewire. Many project studios use such a space-efficient solution, as the mixing room at other times can serve as business office, media archival, etc. Software mixing is heavily integrated as part of a digital audio workstation.

Applications

Public address systems use a mixing console to set microphones to an appropriate level, and can add in recorded sounds into the mix. A major requirement is to minimise audio feedback.

Most bands use a mixing console to combine musical instruments and vocals.

Radio broadcasts use a mixing desk to select audio from different sources, such as CD players, telephones, remote feeds, or prerecorded advertisements. These consoles, often referred to as "air-boards" are apt to have many fewer controls than mixers designed for live or studio production mixing, dropping pan/balance, EQ, and multi-bus monitoring/aux feed knobs in favor of cue and output bus selectors, since, in a radio studio, nearly all sources are either prerecorded or preadjusted.

Dub producers/engineers such as Lee "Scratch" Perry were perhaps the first musicians to use a mixing board as a musical instrument.

Noise music musicians may create feedback loops within mixers, creating an instrument known as a no-input mixer. The tones generated from a no-input mixer are created by connecting an output of the mixer into an input channel and manipulating the pitch with the mixer's dials.

Gallery

• 
  BBC Local Radio Mark III radio mixing desk
• 
  Allen & Heath Mixing desk used for live performances.
• 
  Mackie CR1604-VLZ mixing console used in a home studio
• 
  Solid State Logic SL9064J
• 
  Solid State Logic SL4064G+
• 
  Focusrite Console 72in 48out with GML Fader Automation

Mixing console manufacturers

• Alesis
• Allen & Heath
• Audient
• Audix Broadcast Ltd
• Automated Processes, Inc.
• AMS Neve
• Avid
• Behringer
• Cadac Electronics
• Clarec
• Carvin A&I
• Crest Audio
• D&R
• DiGiCo
• Digidesign
• Deubner Hoffmann Digital (DHD)
• Electro-Voice
• Euphonix
• Fairlight
• Focusrite
• Daniel Flickinger
• Harris Corporation
• Harrison Audio Consoles
• Klotz Digital
• Lawo
• Logitek
• Mackie
• MCI
• Midas Consoles
• Peavey
• Phonic Corporation
• Pioneer Corporation
• Presonus
• Rane Corporation
• Roland Corporation
• Roland Systems Group
• Samick
• Samson Technologies
• Shure
• Solid State Logic (SSL)
• Soundcraft
• Speck Electronics
• Studer
• Studiomaster
• Tapco
• Tascam
• Ward-Beck Systems
• Yamaha Pro Audio
• Yorkville

See also

• Aux-send
• Board mix
• Console automation
• DJ mixer
• Electronic mixer
• Pan law

External links

• Glossary of mixer terms
• Mixer how-to